Ask Experts Questions for FREE Help !
Ask
    sonny15's Avatar
    sonny15 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2012, 02:00 AM
    Bryant 90 plus furnace making squealing noise after running cycle.
    Problem started as night fall began. After it ran its cycle it started making a squealing noise. I was concerned so went into my basement and took off the front cover and located to noise. It was coming from the draft inducer motor. I then turned to thermostat off and stay off for a few minutes. After turning it back on it started making to noise again. I went near the furnace and switched the furnace off and turned it back on. It then started the fan for a minute, then shut down. As it sounded like it was starting back up it started to make the squealing noise again, but came on after a minute. The problem repeated for a few hours. I wanted to know what the problem is and what my options are because it is mid-winter and in Wisconsin weather (10-20 degrees and lower at night times.) Thanks in advanced.

Check out some similar questions!

My Maytag HAV2558AWW washer has started making a loud noise during the spin cycle [ 0 Answers ]

It is only making the noise at the start of the spin cycle. As it picks up speed, the noise goes away, but it is very loud initially.

Bryant Furnace Inducer Motor Fan Squealing [ 3 Answers ]

I have a byrant furnace model 395b - the inducer motor fan squeals and I was wondering if it should be repalced or can I oil it and how? The furnace company wants $100 to look at it and I was wondering if I could do it myself!

Maytag washer, 5 yrs old, makes a loud squealing noise, but not during spin cycle. [ 0 Answers ]

My washer works fine, but is making a loud squealing noise during wash/rinse cycles. It's quiet during spin cycles. Any ideas?

Bryant Heat Pump Making Noise [ 1 Answers ]

I have a Bryant Heat Pump installed 6 years ago - had the coil replaced last year - it has suddenly starting making a chirping noise (sounds a bit like a cricket). The noise is not really constant but happen on and off all day and night. Could this be a sign of a problem or something that might be...

Kenmore Elite making Loud noise at END of spin cycle [ 1 Answers ]

I have Kenmore Elite model #22996. Last week it started making a very loud thumping noise at the end of the spin cycle. It also does it if you open the lid during the spin cycle so it must being related to it need to stop. It is balanced, it does not matter on load size, and the springs are all...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.