Ask Experts Questions for FREE Help !
Ask
    garyre's Avatar
    garyre Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2007, 12:09 PM
    Access to fridgidaire dryer
    I'm trying to check what I think is a bad ceramic ignitor on my Frigidaire dryer and it lacks the removable panel at the bottom front. How can I access the ignitor?
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Oct 31, 2007, 08:49 PM
    Some you have to take the top off and there is 2 screws about a third of the way down then remove the whole front.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing fridgidaire dryer bearings? [ 2 Answers ]

I have read on this site how to remove the dryer drum to replace the bearing. After taking the front off the dryer I realize that the drum is actually leaning against the inside of the dryer. My sqeaking noise could be a result of this while it is spinning (rubbing against the inside of the dryer)....

Fridgidaire dryer trouble [ 1 Answers ]

The dryer has been making some squeaking lately. Well, today it got super loud and has started to feel extra hot on the top and control panel. It is electric and the model number is: FDE336RES1 Can anyone help me?

Fridgidaire washer won't drain or spin [ 8 Answers ]

Hi! My Frigidaire (model # FWX833AS1) washer works great until you get to the spin cycle. Followed various posted advice such as check switch continuity (switch okay), inspected drain lines, and pump housing(all clear) and tested pump by hooking it up to 110vac(pumps great). So I assume it must...

Fridgidaire dryers [ 1 Answers ]

My dryer will not start and the manual says it may be the thermal limiter. Is this costly to fix?

Fridgidaire Furnace Noise [ 2 Answers ]

I just had a new frigidaire gas furnace installed in home. I have never heard a furnace this loud when the blower comes on. Is this normal? My last furnace was over 20 years old and did not make this much noise.


View more questions Search