Ask Experts Questions for FREE Help !
Ask
    SJBurke's Avatar
    SJBurke Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2004, 04:21 PM
    G3 to USB Printer Cable?
    I have a G3 with an HP/USB connection, what cable will connect them? 8 pin mini DIN to USB? Or serial to USB :confused:
    darrel1953's Avatar
    darrel1953 Posts: 86, Reputation: 12
    Junior Member
    		  
    #2

    May 5, 2005, 02:24 PM
    Usb printer cable
    The printer cables have a little different end on them than any other usb cable and it usually has to purchased separately but USB would be the way to go even though you probably can do it just as well with a serial cable but then there are so many choices you really need to be sure you are getting the correct one by counting the pins and making a drawing of the shape of it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

RG6 cable [ 3 Answers ]

I am running wire for my satellite dish for my basement. There are two types of RG6 at Lowe's. RG6 and Digital RG6. What does the satellite and cable companies use. I can buy 250' of digital and 500' of the regular both for $70 I don't know what's best.

SER Cable [ 1 Answers ]

Is SER cable (0,0,0,2) direct bury, or must it be in conduit?

Ethernet cable [ 3 Answers ]

I am on orange broadband and I need to connect the ethernet cable from my livebox into my computer ,however I donot have an ethernet socket on my computer so is there another way of doing this .

BX Cable [ 4 Answers ]

Hi. Does anyone have any tips or suggestions for cutting BX armored cable without buying a special tool? I just have to cut two wires to tap into the line but am a little afraid of damaging the wires inside. Thanks. Dave.

View more questions Search