 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pressures
If I have a cylinder 4 in. in Dia. Hallow and encircle it with another cylinder that has walls 1/8 in. thicker, pack sand around the smaller cylinder between the 2 cylinders, and I pack the sand evenly, how much pressure will it take to break the smaller cylinder, the smaller cylinder is plastic and the outer is metal, the smallers wall thickness is 3/16 in and the metal is 1/4 in thick?
|
||||
Check out some similar questions!
My a/c unit is not cooling correctly,unit runs all night and cools somewhat,I belie=ve the pressure is low,what should be the readings on low & high side tubing.
I am trying to check operating pressers on my home unit. The low side pressure on the R-22 scale reads 44. What should it read if ambient temp. is 89?
:eek: Hi, I have a dual sink setup in the kids bathroom. The water feed is split behind the vanity going to both faucets but one has significantly lower pressure even when the other is shut off. I pulled the vanity out and there are no crimps in the pex water supply and they both run unobstructed...
I presently use a 20-lb propane bottle for my outside gas smoker. I would like to connect the smoker to my home 250-gal propane tank. Are the pressures from these two sources the same, and if not, what would I have to do to accomplish this? Thank you.
This is in reference to a 13 SEER, 5 ton, RHEEM a/c unit: There is a difference of approximately 100 psi between the suction and liquid lines when the system is off. What is this lack of equilibrium an indication of?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
