PDA

View Full Version : Power but no light?


jeffotra
Jun 5, 2007, 08:32 PM
I just wired up some track lights. Five in a row. And they all work except the last one. I tested it and it has 120 volts I put the light in and it has 120 volts. I took all the lights out of the first 4 and still no good. Could the last one be grounded? But wouldn't that make the first 4 not work as well. Any feedback would be great
Thanks-

hvac1000
Jun 6, 2007, 04:52 AM
Try a new bulb?

jeffotra
Jun 6, 2007, 07:53 AM
Yea I tried a new bulb even put the bulb in another fixture to make sure it worked there still nothing

Stratmando
Jun 6, 2007, 08:24 AM
Look at the little contact points, make sure they are not bent,
Are you installing on track 180 degres out.
Remove a working one, look what side of track single contact is on.
Also compare good and bad one side by side.

jeffotra
Jun 6, 2007, 08:38 AM
Thanks ill give it a shot

jeffotra
Jun 13, 2007, 11:02 PM
The common wire was loose on the previous circuit tthanks