PDA

View Full Version : How do I remove a starter on a B&S engine model 311707 Type 0132-E1?


rjabski
Aug 6, 2011, 06:56 AM
I want to remove the starter from my B&S engine, Model 311707, Type 0132-E1. What is the best way to do this?

ballengerb1
Aug 6, 2011, 10:19 AM
Is the engine mounted to a mower or a tractor at present? If so, which one?

rjabski
Aug 8, 2011, 03:41 AM
I thought I replied to your question, but perhaps it didn't get through. The engine is on a Sears tractor, Model 917.270671. Hope this is enough information // Richard

ballengerb1
Aug 8, 2011, 09:44 AM
The starter is right next to part #81. After disconnecting the battery and then the cables there should just be 2 bolts holding the starter to the engine. http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Riding-mower-tractor-Parts/Model-917270671/0247/1509200/P0050304/00005?blt=06&prst=0&shdMod=917270671

rjabski
Aug 8, 2011, 11:43 AM
Thank you. I thought it might be necessary to remove the ring gear, Key #726. If I get your response correctly, the starter should just drop down after I unscrew the two bolts that support it. // Richard