PDA

View Full Version : Join pvc pipe to metal pipewith glue


nielboshoff
Jul 30, 2009, 05:34 AM
Is there a glue on the market that joins metal to pvc I need to connect a 50mm pvc pipe to a 60mm metal pipe I have a connector (pvc) that will connect perfectly its got thread but the 60mm metal pipe is plain on the inside I have tried silicone but it can not handle the pressure. I am connecting a pool pump to the system to pump water to a drum 3m up.
Can any one please tel me if there is a glue on the market that will do this for me or any suggestions?
Thanks niel

speedball1
Jul 30, 2009, 05:49 AM
I need to connect a 50mm pvc pipe to a 60mm metal pipe I
Your 50 MM PVC figures out to 2" PVC. However, the next pipe size up is 2 1/2" which is 63.5 MM. You do not glue PVC to metal you use threaded adapters to connect the two. Does the metal pipe have a male thread or a female coupling on the end? Let me know, Tom

creahands
Jul 30, 2009, 06:33 AM
Hi Tom

Is it possible neilboshoff is measuring one pipe inside diameter and the other outside diameter

Neilboshoff= what is metal pipe made of ?

Chuck

speedball1
Jul 30, 2009, 06:58 AM
Hey Chuck,
It doesn't make any difference what his pipe sizes are. He still can't glue PVC to galvanized pipe. I would say his PVC's 2" and the other's 2 1/2". Regards, tom

topcat6
Jul 30, 2009, 07:29 AM
How about just getting a 2" X 2 1/2" fernco rubber adapter, tighten the bands and have a beer?

speedball1
Jul 30, 2009, 08:00 AM
how about just getting a 2" X 2 1/2" fernco rubber adapter, tighten the bands and have a beer?

Great Idea Tiopcat,
I'm waiting for his response. For a pressured line I recommend threaded connections. For drainage I recommend a Fernco Shielded Coupling, (see image) I never install neoprene couplings under ground. Cheers, Tom

nielboshoff
Aug 3, 2009, 02:52 AM
your 50 MM PVC figures out to 2" PVC. However, the next pipe size up is 2 1/2" which is 63.5 MM. You do not glue PVC to metal you use threaded adapters to connect the two. Does the metal pipe have a male thread or a female coupling on the end? Let me know, Tom Hi Tom thanks for the response the metal pipe is not threaded at all

nielboshoff
Aug 3, 2009, 03:07 AM
Hi Tom thanks for the response the metal pipe is not threaded at all
Hi Tom
These pipes are all abouve ground I have used some self tapper screws and silicone but some of the joints are still leaking.
What silicone would you sugest I use?
I have used a general purpose silicone and like I sead it still leaks from place to place.
This system gets powered by a 1500kw pool pump.
Kind Regards
Niel Boshoff


how about just getting a 2" X 2 1/2" fernco rubber adapter, tighten the bands and have a beer?


The beer sounds good but in South Africa it is winter would rather stick to a sherry

speedball1
Aug 3, 2009, 04:21 AM
Measure the inside diameter of the metal pipe again and let me know. I'm having difficulty finding fittings for a 60mm pipe.
Is this a suction or a pressure line? If it's a suction line everything must be air tight and I don't know if you're going to make it with glue . Regards. Tom

nielboshoff
Aug 3, 2009, 07:28 AM
Measure the inside diameter of the metal pipe again and let me know. I'm having difficulty finding fittings for a 60mm pipe.
Is this a suction or a pressure line? If it's a suction line everything must be air tight and I dunno if you're gonna make it with glue . Regards. Tom The inside of the metal pipe is 60mm and it is not a standard water pipe it is part of a frame and it is pressure not suction.
Thank you for your trouble
Kind Regards Niel Boshoff

speedball1
Aug 3, 2009, 07:52 AM
The inside of the metal pipe is 60mm and it is not a standard water pipe it is part of a frame
The best I can come up with is a 3 X 2" Fernco Reducing Coupling # 1056-32,(see image) You might be able to crank down on the 3" clamp to fit the 66mm pipe. Good luck, Tom