PDA

View Full Version : Install rebuild (carb) kit in craftsman garden tractor


ernest hufnagel
May 20, 2009, 06:39 AM
No instructions arrived with rebuild kit for Craftsman garden tractor, model No. 917.275970. Are do-it-yourself instructions available and how do I locate them?

KISS
May 20, 2009, 08:00 AM
A diagram of your carb should be here: Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears PartsDirect | SearsPartsDirect.com (http://www.searspartsdirect.com) . Sometimes you need to look up the engine number and then the carb.

There will smetimes be more ports than you have. Ignore them.

It's a case of taking the carb apart and cleaning everything and putting it back together the same way.

Lubercate the O rings with a little oil or silicone grease or grease designed for that purpose.

Then the hard part is figuring out the settings of the mixture screws. You can usually start with 1.5 turns out
If there are two, then there is one for high and low speed.

Adjust both in their respective speed range for smooth running.