OK I am a mechanic I have unhooked kill wire from magneto.flywheel key and magnets are fine and clean.. air gap is 10 and I have no fire. I performed three test with multimeter test 1 ohms between bolts on coil and negative terminal of battery.. it has 0 ohms... test 2 from spark plug wire to bolts on mag and I get no reading at all... test 3 from kill terminal on mag to negative battery cable and I get 0 ohms... I bought a new ign mag but let someone else put it on and they touched a 12 volt wire to the kill terminal would this destroy it if so I need another...

ok i am a mechanic i have unhooked kill wire from electronic ign module.flywheel key and magnets are fine and clean..air gap is 10 and i have no fire. i performed three test with multimeter test 1 ohms between bolts on module and neg terminal of battery..it has 0 ohms...test 2 from spark plug wire to bolts on module and i get no reading at all....test 3 from kill terminal on module to neg battery cable and i get 0 ohms...i bought a new ign module but let someone else put it on and they touched a 12 volt wire to the kill terminal would this destroy it if so i need another...

Need to correct words used by mag or magneto I should have used electronic ign module