strangerjll
Mar 9, 2009, 11:27 AM
I have a 1995 Civic LX was over heated and melted the headgasket. I have replaced the head gasket and still didn't work run because of low compress under 70psi on a few cylinders. I have resurfaced the head and now all cylinder has 180psi. I put everything back together but the car looks like it's going to start but it wouldn't. You know when you can feel the car about the run but it didn't. The battery light on the dash about to turn off because the car is about to start but then turn back indicating the car didn't start successufuly.
I check all 3 ingredients such as COMPRESSION, FUEL & SPARK ( all 3 available ). What else can cause the car from not starting ? P.S. The batter is brand new so no doubt on the battery.
Maybe the fuel is old ? The car has been sitting there for over 6months. Can the car start without the exhaust header on ? Just a question but I did put it back on when I tried to start the car. I also purchased new spark plugs.
I'm just out of ideas.
Thanks
I check all 3 ingredients such as COMPRESSION, FUEL & SPARK ( all 3 available ). What else can cause the car from not starting ? P.S. The batter is brand new so no doubt on the battery.
Maybe the fuel is old ? The car has been sitting there for over 6months. Can the car start without the exhaust header on ? Just a question but I did put it back on when I tried to start the car. I also purchased new spark plugs.
I'm just out of ideas.
Thanks