I have a drip on the hot side of my Delta faucet. It is a single handle bathroom faucet. I removed the small cap on handle, then the handle itself, but cannot remove the white plastic shield in the center or the chrome cover around it. Neither will turn and I actually moved the whole sink trying! Any suggestions will be greatly appreciated.

Surf this site and see if you can get to your model installation instructions. Installation : Frequently Asked Questions : Delta Faucet (http://www.deltafaucet.com/customersupport/faq/Installation/index.html)

Hello freefowin,

Open Bob's link it will help you, if you have the model number please post it that we will give the exact details, Thanks.

John

Yes, it is hard to remove that white plastic round piece w/o loosening the metal piece. You unscrew the entire metal cone-shaped cup that holds that plastic round piece in. Than, the plastic nut will unscrew easily. Make sure you turned hot and cold water off before you do anything.

I am sending you the link below I hope it will help you, Thanks.

John