Washer will not start, Touch Panel will not light, turn on. Did this once before and started to work a day later, now dead for 4 days. Acts like no power (yes working, changed plug).

Any Ideas?

Try changing the touchpad assy. My Kenmore Elite Catalyst washer did same thing intermittently, Model # 11022054100. Changed out the control board did not help. I noticed some of the touchpads did not give correct resistance during ohm meter check. I was hesitant to spend the additional $200+ to verify it was the touchpad assy, but gave it a shot. Found the part online at repairclinic.com. About 10 minutes to install, my wife is happy not having to make more trips to the laundromat.

RepairClinic.com - Appliance parts for 80 brands, shipped same day. (http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=904767)

I have a kenmore elite washer he t3 and it will get half way through the cycle and then its starts flashing SUD (and there is no extra suds in there) then it will flash f 02. Please help is there a way to
Reset my controls or something.