View Full Version : Garbage disposal
 
 ceke586
Aug 19, 2008, 01:54 PM
I want to put a garbage disposal in my restaurant but I am not sure if it will work with my sink. I have a standard commercial sink with about a 1 1/2" drain.
 
Can anyone tell me what is involved if anything to complete this project?
 ballengerb1
Aug 19, 2008, 01:58 PM
Residential kitchen sink are also 1 1/2" drains. Remove the entire basket, the garbage disposer has its own replacement basket that allow the unit to connect from underneath.
 ceke586
Aug 19, 2008, 02:10 PM
I am not referring to the drain pipe, but to the hole in the sink itself.
 massplumber2008
Aug 19, 2008, 03:09 PM
Hi Ceke586... 
 
All residential kitchen sinks and all commercial sinks (except hand sinks and lavatories) have a standard size hole in them to accept strainers or garbage disposals.
 
You will be fine installing a residential disposal or even a larger batch feed commercial disposal.
 
Let me know if have any more questions... 
 
MARK
 ceke586
Aug 19, 2008, 03:54 PM
Ok, when I buy a stopper for my sinks, it measures 1 5/8"
 afaroo
Aug 19, 2008, 07:20 PM
As mark says all residential kitchen sinks and all commercial sinks (except hand sinks and lavatories) have a standard size hole in them to accept strainers or garbage disposals,please click on the link below and it will lead you step by step how to install a garbage disposal, good luck.
 
John
 
Installing a Garbage Disposer Tutorial (http://www.easy2diy.com/cm/easy/diy_ht_3d_index.asp?page_id=35743512)
 Milo Dolezal
Aug 19, 2008, 08:52 PM
I think you are not getting correct info from other plumbers: You have to have 3" drain opening for regular garbage disposer installaion
 ceke586
Aug 20, 2008, 02:43 AM
That illustration was great, but still will not help me. Just tell me how to install one on a utility sink. (hand sink) That is the size the drain hole is on my sinks.
 massplumber2008
Aug 20, 2008, 03:16 AM
Ceke... 
 
I think we're getting hung up on some terminology and measurements here... 
 
You said you had a STANDARD COMMERCIAL SINK with an 1 1/2" drain... and we told you that any standard commercial sink will be able to fit any disposal... any standard commercial sinks except HAND SINKS.. (see post #4 and post#6)... 
 
Now at post #8 you are telling us it is a UTILITY SINK and finally a HAND SINK..? 
 
So, if you have a HAND SINK with 1 1/2" hole in sink ...you cannot install a disposal on it as originally posted at post#4.
 
Hope that resolves this for you... ;)
 
MARK