I have inherited a kawasaki kbl26a weed eater with the home I'm renting now and cannot figure out how to load the nylon. Got any leads for fixing my weeds?

Hi,
Thanks for posting a question here, and Welcome to the site.
I'm not familiar with this particular brand. But, if you look underneath the cutter, you should see something that you can turn, like taking the lid off a jar with your hand. Normally, there is either a nut to use a wrench, or a larger type hard plastic knob, that you can loosen with your hand.
Best of luck.

I found a diagram of the assemply here:

http://www.buykawpower.com/kmcb2c/Menu?action=CATALOGB2B&prodID=2457587&elementType=2&historyDepth=2

You can use that site to find a local dealer who may be able to show you how to change the reel. There is a Service Manual, but it appears you need to order it.

Thanks for the post scott problem solved!
J

Glad to assist

Hi, chachi,
I am glad you found a solution. Hope you have some good weekwacking fun.