PDA

View Full Version : Range Hood Microwave install


CarlyTD
Apr 18, 2008, 11:02 AM
Hi,

I am replacing a standard range hood with a microwave and have a problem.

I agree that it was way to low, so I took a few inches off the cabinet and it seems to be an OK height, but it is deeper than the cabinets so it sticks out and blocks the range top. I only need a few inches.

My question is instead of mounting it on the wall, can I cut out the drywall and frame an area so that the microwave is slightly recessed into the wall?

I am OK with making sure the vent and the cord, and screw holes are proper, but can a microwave sit in the wall?

Any hints or advice would be great.

Thanks

PS - One thing I forgot to mention, this is a condo and the wall that would need to hold the microwave is common to another unit...

Stratmando
Apr 18, 2008, 04:00 PM
Personally I would leave the wall intact, and butt up to wall. Likely a code issue as well.
You may need to relocate the outlet to the cabinet above Micro.