I have a whirlpool washer model number lsr5232lq0 that continues to fill during all cycles
And overflows I can get it to work correct on small load setting.
Can anyone tell me what to look for or what part to replace.
Thanks in advance
Wjc

Check the pressure switch

Hi,

Also check the water inlet valve. It maybe sticking open.
To test it out start filling the washer with water. Then turn the washer off at the timer during the fill cycle.

Does the water stop at the same time you turn the washer off or does it keep filling for sometime?

If the water inlet valve does not turn off at the same time you turn the washer off at the timer then replace the water inlet valve.