PDA

View Full Version : Montgomery Ward 18/46 Power Kraft BELT Number


r_rothzen
Jul 29, 2007, 08:45 PM
I have a 1995 Power Kraft riding lawn mower that I purchased from Montgomery Ward. It is an 18 horse with 46 inch cutting deck with 3 blades. I am in need of a belt to run the 3 blades but can not find a number for the belt or a number for the tractor to try and cross reference it. It is a hydrostat. Also not for sure on how the belt goes around the pulleys. Any help would be greatly appreciated.
Thanks,
Ron

MOWERMAN2468
Aug 1, 2007, 02:56 AM
If You Have The Old Belt, Take It To Your Nearest Small Engine Shop And See If They Can Look It Up In The Parts Book, Or Measure The Belt And Match It Up. Best Of Luck.
P.s.
This Unit Was Built By Mtd , I Think.

izzyburnt
Apr 5, 2012, 07:33 PM
I use either a 99 or 100 inch 5/8 belt on mine