Log in

View Full Version : Fill tube not filling... until water source turned off and on again


Wenjef1216
Jun 2, 2014, 02:26 PM
Good evening,

How many do-it-yourselfer questions do you get that start saying... "Bet you never heard this one!"? Well, I hope you have.

I have a toilet with a ball cup fill valve and the refill suddenly stopped working... kind of. It flushes fine, but upon refill, the water trickles out of the arm above the refill tube. If I turn off the water supply and turn it back on, it gushes from the refill like normal. Happens every time. I am baffled to no end. Any thoughts?

Jeff

speedball1
Jun 2, 2014, 03:52 PM
Sounds like you have trash in the washer opening. Shut the water off to the toilet. Not just the top of the cap counterclockwise a, and pull up. You will find a black washer, Pry it loose and make sure the hole is clear. Now place a pan over the opened valve and turn the water back on to flush out the supply. Reassemble and test. Good luck, Tom