Log in

View Full Version : L100 battery does not hold charge


bballaro
Apr 18, 2010, 07:37 AM
Battery not holding a charge on my John Deere L100 lawn tracter/mower. Was told it could either be the stator or voltage regulator. Which one should I attempt to replace first and is there a blow up of where they are located.
I have mechanical aptitude and not afraid to get into it myself.
Appreciate any help.

Bill B

crigby
Apr 20, 2010, 07:12 PM
Hi,
The regulator could be bad, but I would be suspicious of wiring under the dash first. Disconnect the battery ground and hook a meter in series and start unplugging things to see when resistance goes to infinity, if it was not already. If it was already at infinity, it is a bad cell in the battery.
Peace,
Clarke