I have tried to install this printer three times and nothing happens. The disc says lexmark 640 but the printer it self says z645 I need help. What can I do now I'm getting very :mad: thank you for your time.

You will be able to find the updated drivers for that printer here:

Drivers and Downloads (http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:548:0:0)

Just download and install the drivers, and you should be ready to go. Good Luck.

First my condolences on purchasing a Lexmark. Can you explain exactly what you have been doing to install it? That printer supports Vista, so the disk you have should work.

You will be able to find the updated drivers for that printer here:

Drivers and Downloads (http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:548:0:0)

Just download and install the drivers, and you should be ready to go. Good Luck.




Thank you but I did that and it says not responding to the computer. The printer that is and it also says the printer is installed, but when I go to print my reports out it tells me its not found. PLEASE ME!! Thank you for your time.

Edited to remove e-mail address <>

Scott - Is there some reason why you feel it is necessary to disparage Lexmark products or do just have a warm fuzzy for someone else's products?

RDK30 - M/S has released a patch. It appears that Vista is not kicking off a registry service which in turn is causing frame errors on IE. So if you are connected to Vista via a network port, you should visit M/S and see if your error matches theirs.

If you are not connected via network, then send me your exact printer model and method of connection (serial - parallel - USB) and I'll see if I can dig up more info for you.

Don