Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman Furnace
[ 4 Answers ]
I have a two year old high efficiency Goodman furnace that seems to have problems from time to time. The strange thing is that my son-in-law had his furnace installed about the same time and he has the same problem. We have our thermostat programmed for 62 during the night and at 6:00 am it goes...
I have a Goodman gas furnace.
[ 2 Answers ]
I have a Goodman gas furnace approx 6 years old. When we turn the unit on at the thermostat the ignitor will glow red but the pilot is not coming on. I have replaced the flame sensor. Any suggestions? The LED was flashing 1 blink for possible ignitor or flame sensor but has sense quit flashing. ...
Goodman furnace
[ 1 Answers ]
Furnace flame will stay on for 5 seconds and shut off. Led light on circuit board flashes once after it completes cycle. 1 flash indicates the following possible problems: Gas flow... Gas pressure... flame sensor... as a result, everything seems to be working normal. However, I did replace the...
Goodman Furnace did come on
[ 1 Answers ]
I got a Goodman GMH950904cx furnace. I installed it about a month ago, and it worked fine when I turned it on. Recently, the weather chilled and I tried to turn on the furnace everything worked except there is no gas coming up. The motor runs, and ignitor light up but no GAS. The gas tank is... View more questions Search
|