Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathroom Vanity Light Height..
[ 2 Answers ]
Hello again, everyone! Would anyone please tell me what a good "standard" height is for a vanity light, whether it be a single sconce or a 3-light wall-mount fixture? Any suggestions extremely appreciated! Is there any "rule of thumb?" :confused:
Replacing a bathroom vanity light
[ 2 Answers ]
I am replacing a bathroom vanity light and would like the replacement to also have an electrical outlet since there is none in this 1960ish bathroom. Do they make these anymore? If not, in what other way could I get both a light and an electrical outlet in the bathroom? Thanks
Outlet in Bathroom over vanity...
[ 5 Answers ]
Hello everyone - I am adding a linen closet to my bathroom in a corner where I currently have a GFI outlet. Therefore, this outlet will be covered. I plan on connecting to the load side of the outlet and running some wire through the wall so that I can still easily access an outlet in the...
Receptacle testers
[ 4 Answers ]
When using a standard receptacle tester on a GFI circuit, I get a Hot/Ground Reverse reading. When I test the same GFI circuit with a GFI Receptacle Tester, I get an Open Neutral reading. The problem was a loose neutral wire . Are these normal readings to expect from the two testers? ...
Receptacle wiring
[ 3 Answers ]
I want to add a receptacle to a box I have in my pantry that has an existing light switch. I have a three wire load coming in to the box from the circuit breaker. The red is wired to the switch and the blacks and whites are connected with wire nuts. The three wires feed other boxes in my kitchen.... View more questions Search
|