Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman Furnace won't kick in
[ 5 Answers ]
Hi have been reading the various posts for a couple hours now. When my Goodman GMNT-080-48 forced air starts up, all appears well on start up sequence ; blower runs and igniter heats up and then turns off. Blower never comes on and the heat never seems to get going full. The little red light...
My intertherm furnace pilot lights but furnace won't kick on
[ 5 Answers ]
I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...
My furnace will not kick on!
[ 1 Answers ]
My furnace will work regulary sometimes, but sometime it does not kick on by itself you have to turn the thermostat to off then back on and then it will run until it meets the tempature setting. But then when its time for it to kick back on it does the same thing. We have replaced the thermostat 3...
Furnace won't kick on
[ 1 Answers ]
My pilot light is lit on my furnace but the furnace won't kick on. I changed the thermostat and it did fire up but after running a short while it started to blow only cold air. Can anyone tell me what could possibly be wrong?
My Furnace won't kick on even after I've manually primed it 10 times
[ 1 Answers ]
I need to know why I can't seem to keep the furnace running I prime it it stays on for 2 minutes then shuts down even before the blower starts . What's up with the red light near the reset button View more questions Search
|