Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing cast iron drain pipe?
[ 6 Answers ]
Put in a dishwasher and was working on the drain when I noticed the 2" cast iron drain pipe wasnt in very good shape. I spliced it with a sawzall ans the put pvc in and tried to use a boot on each end but it still leaks. Then from the cutting another joint in it started to leak. Ive decided its...
Cut off Mysterious pipe below floor level.
[ 7 Answers ]
Two part question. 1. A almost new house, a 4" PVC pipe 1/2 inch above the concrete basement floor has something in it that looks like it turns but won't. Pipe has a cap on it. What the heck is it? 2. I would like to cut it off just BELOW the floor level and put the cap back on it so the floor...
DWV cast iron cut
[ 1 Answers ]
1) What's the best way to cut a 4" cast iron soil pipe that is against the wall of the house so I can't get a snap cutter chain around it? related: 2) Is there an adapter to connect 3" pvc (toilet drain) to a 4" cast iron hub on the main stack? Thanks
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...
Cast stand pipe
[ 4 Answers ]
Tom, how you doing? Hope you had a great newyears. Now for my question. My main stand pipe that I will have to tie into is 4 in. cast. The present drainage comes off the cast at what looks like a 4 in. sanitary T. My present drain that ties into the cast is run out of 3 in. copper. Is it possible... View more questions Search
|