Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rotating Toilet 90 degrees on Cast Iron Flange
[ 1 Answers ]
I am remodeling a bathroom in a 60s vintage home with adequated crawl space. I need to rotate the toilet flange 90 degrees to install the new toilet as the orientation has changed with the remodel. The materials of construction for plumbing is cast iron. I am keeping the same elevation of floor....
Cast Iron Toilet Flange Problems
[ 3 Answers ]
Hi, I have read forums on having the cast iron toilet flange being too high after tile removal. I have some additional questions on this: 1. After removing the Thick set Mortar, the flange is 1 " above the subfloor. Can I just add different types of underlayment to reach the flange (i.e....
Remove cast iron flange
[ 2 Answers ]
I am replacing a plastic (fiberglass?) shower pan with a new one. I have the existing pan free from the walls and subfloor, but it is still being held in place by the drain flange (I did remove the strainer!). The flange appears to be cast iron (it is very rusted inside) and is about 4 inches...
Offset closet flange, lead soil pipe
[ 5 Answers ]
I've reviewed a bunch of questions/answers on this forum and have some ideas, but my problem is pretty specific, so I figured I'd describe it and hope for the best. (BTW, I'm totally impressed with the quality of responses on this forum!) Re-doing a half-bath, but did not plan ahead too well,...
Offset Closet Flange Installation
[ 1 Answers ]
Installing a toilet in a new basement bathroom. Center of 4: PVC drain pipe is 13.5" from the wall, so I tried to use an offset flange, made by Oatey Caspers. It was a snug fit, so I did some sanding with sandpaper and emery cloth, applied the cement and tapped it down, but could not get it in... View more questions Search
|