 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Why is the fuse blowing every time my generator shuts down after running. Model # ASPAS1BBA015 Serial # 4605V06869
I have a Bryant furnace about 10 yrs old. This is a furnace/central air unit located outside. The fan in auto posistion would not come on. Switched to on position and furnace lit and fan ran. Turned to auto and ran for several seconds and went off. Now on auto nothing works but if I turn the fan on...
When gas furnace comes on I have flame rollback and it blows out pilot could this be a crack in the heat exchanger?
New system (installed 6/2009): 2 zones, Bryant Evolution Control thermostat. Control panel regularly shows "system malfunction" reading with several "active events" recorded, although heating continues. Certified Bryant repair person here several times, but can't determine the problem. Says the...
I have a 23 year old "Bryant Plus 90" furnace. Until my house reaches the thermostat setting the burners remain on and the blower cycles on and off in 7 to 10 minute cycles. Should the burners remain on without the blower being on?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
