Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove single valve handle - Delta Shower
[ 48 Answers ]
I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...
I have a single handle Delta tub faucet w/o a shower. Diverter engaged.. Disengage?
[ 2 Answers ]
I have a single handle Delta tub faucet w/o a shower. The faucet diverter for the non-existent shower has become engaged, the ring at the spout exit. With the pressure diverted to the non-existent shower, how do I get the pressure back to the spout? I've tried messing with the ring but to no...
Delta 1400 Series Single handle shower
[ 9 Answers ]
I recently replaced the cartridge on my Delta 1400 series monitor single-handle faucet, and everything seem to have gone in to place OK, I did have some trouble removing the handle and the clamp brass ring initially as it had not been moved since installation (2002), but now when I turn on the...
Delta single handle shower removal
[ 2 Answers ]
I have to replace a cartridge in a delta single handle shower. It is a one piece lever. It has a set screw on the inside bend of the handle. I have removed the set screw and the hard water corrosion will not break allowing the handle to pull off. I have tried boiling hot vinegar, along with a...
Removing Delta bathtub/shower single handle faceplate
[ 7 Answers ]
I am trouble-shooting a tub and shower that has gone to low flow, and I suspect I need to get at the mixer cartridge. I've got the faucet removed (white plastic pipe in pictures) and have gotten down to the faceplate, which is two pieces: the circular one in the center, and the larger... View more questions Search
|