 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace works and sometimes it will blow hot air and sometimes cold air
I have a inertherm heat pump model # c3da-030u-b. The thermastat has a red lcd light that should come on when the heat is on. When the heat kicks on sometimes it will blow really hot air out then a lot of the time it will blow cool but a little warm air out. Is my thermastat bad?
|
||||
|
||||
|
The question is. Is the heat pump keeping the temp in the house on what you have the thermostat set at? If so I would say its working the way it should. Average supply temp of a heat pump is around 98 degrees, it feels cool but its heating. When you feel the hot air at times it's the aux heat running with the heat pump. In short I would say your thermostat is fine. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My home furnace is not working properly. It only blows cold air.
My furnace is going on for a few minutes and then shuts off. The pilot is lit and it is igniting but is only blowing cold air and only stays on for about 2 minutes then the blower shuts off but the flame is still burning
My furnace blows hot air and after a while it blows it out cold. What could be the problem?
my furnace does not blow hot air. And the red light indicator stays on continues. My furenace is westinghouse it is 4 years old. And the furnace keeps on working even when I turned off from the in the termostat. I can only turn it off by unplaging the power cord. The wiring diagram in the furnace...
:confused: I recently moved into a house & I can barely tell that any air is coming out. I have just paid to have all the ducts cleaned. Please help me figure this out.
View more questions Search
|
