Bryant Furnace turns on but does not ignite

jcintronsps Posts: 1, Reputation: 1

New Member

Jan 4, 2010, 06:06 PM

Bryant Furnace turns on but does not ignite

Bryant furnace come but fails to ignite. I have replace the flame sensor and ignitor but still does not ignite.

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Jan 4, 2010, 06:47 PM

Check for voltage going to the ignitor.

Add your answer here.

Check out some similar questions!

Bryant Plus 80 gas furnace won't ignite burners [ 6 Answers ]

I own a Bryant Plus 80 gas furnace. The fan will run if I set the thermostat to "Fan On" instead of "Fan Auto". But the burners will not ignite. I have followed the user manual instructions to re-start the furnace, but that didn't work. I have a gas water heater and it is heating so I know the gas...

Bryant furnace HSI light comes on but doesn't ignite the fire [ 3 Answers ]

I have a bryant furnace model 373lav036035 fan comes on and igniters glow for about two minutes and shut off but the fire doesn't come kick on but I think it shuts off blower and igniter because gas valve doesn't kick on and let out flame can you tell me what the problem is

Bryant furnace - must press manual rollout reset for burner to ignite [ 2 Answers ]

My Bryant 350MAV furnace is not working properly. While the blower is first running it flashes a code 12. Then the light goes on solid and the burner never ignites. If I hold the manual rollout reset button for 20 seconds the ignitor starts to glow and the burner ignites. What needs to be...

Bryant 383KAV furnace won't ignite, fan blows cold air. [ 1 Answers ]

First we replaced the thermostat. Then we replaced the ingiter. Still only blows cold air? Any one know what the problem is? :confused

Bryant Gas Furnace fails to ignite [ 3 Answers ]

My Bryant Gas Furnace occasionally fails to ignite. When this happens, I can reset it by turning the switch by the furnace off and on. It will then ignite after sparking for 30 seconds or so. The furnace has a pilot that is on and becomes large when the thermostat directs it to, but after sparking...