Ask Experts Questions for FREE Help !
Ask
    cgalv's Avatar
    cgalv Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 10:29 AM
    Fpe 2P60 - 60 Amp circuit breaker size wire
    FPE Class CTL panel. I need to switch to a 60 amp circuit breaker for heat strips. What size wire is required.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 29, 2009, 10:33 AM

    Minimum #6 copper.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Install a dryer 30 amp circuit breaker 10/2 wire [ 1 Answers ]

I recently installed a 30 amp 2 pole circuit breaker using 10/2 w/ground for a new dryer. At the box, I wired the 10/2 w/ground black to one side and the white to one side of the 30 amp 2 poled breaker and the ground to the side bar for ground. I also installed a three prong receptacle, wiring...

Wire size wire & circuit breaker do I need for a 15.8 range [ 2 Answers ]

What size circuit breaker & wire size do I need rfor a 15.8 raqnge ?

Need to run a wire from 50 amp circuit breaker to outside outlets [ 4 Answers ]

My band is performing outside. We have several pieces of equipment that need power. However, we are about 120 feet from the power source where there is a breaker box and 1 outlet. I've been told that this is a 50 amp circuit. I need several outlets to plug in all our gear. I need to know the...

100 amp breaker wire size [ 5 Answers ]

Will #2 aluminum wire fit a 100 amp cutler - hammer circuit breaker

Wire size in a 100 amp breaker [ 1 Answers ]

I was wondering if a 2/0 wire will fit in a siemens 100 breaker? Thanks for your help

View more questions Search