Ask Experts Questions for FREE Help !
Ask
    ewwoodyard344's Avatar
    ewwoodyard344 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2009, 02:52 PM
    Shower stall install
    What needs to be put under the bottom of a one piece fiberglass shower stall when installing, to make it solid
    xcountry292's Avatar
    xcountry292 Posts: 16, Reputation: 1
    New Member
    		  
    #2

    Oct 16, 2009, 05:16 PM
    I lay down a piece of tar paper on the floor then mix up a 40 lb bag of mason mix. Mound it high in a circle around the drain hole, then set the shower into this mix. Good luck
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Oct 17, 2009, 04:12 AM
    I agree with Country. This is called "bedding the shower floor." Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to install a ceramic tile shower stall [ 6 Answers ]

How to install the mud base of a ceramic tile shower stall

Can/how do I install ceramic tile over Formica in a shower stall? [ 4 Answers ]

I would like to install ceramic tile over a sound formica surface in a shower stall. Any help out there? whathree

Adding a second shower head to shower stall [ 4 Answers ]

I'm trying to add a second shower head to a shower stall in the basement. What do I need to do to make sure an equal supply of water at the same temperature runs to both heads. I tried to just run a line from the first shower head to the next but that doesn't work.

Shower stall need height of controls and shower head [ 1 Answers ]

Hi Am building a shower and require the height of the taps and the shower head

Turning walking shower stall into bathtub/shower combo. [ 4 Answers ]

Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line...

View more questions Search