Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tub drain over floor joist
[ 10 Answers ]
I am installing a new tub and wall unit and the new tubs drain lines up right over a floor joist. The old tub drain fit right down the side of the joist. There is about a 1.5" difference between the two tub drains. Any way to get around this without moving a floor joist?
Drilling 2 x 10 floor joist
[ 1 Answers ]
how far from the end of a 2 x 10 floor are you allowed to drill a 2" hole
Floor joist sizing,
[ 6 Answers ]
I have sistered on 2 x 8's to my existing attic floor. It originally was framed with 2 x 4's and then 2 x 6's were sistered along to them. All the 2 x's are resting on the top plate. It feels sturdy enough to lay subflooring onto, but it is a twenty foot span. Will this be adequate?
Drilling holes in floor joist
[ 5 Answers ]
Hi ,I want to move a 3" abs ventpipe in a floor space. The floor joists are 2X10 and near the supporting wall .Can I drill the joist? Do I need to use plywood or 2X10 to sister the floor joist to make up for the weakening .thanks bman55golf View more questions Search
|