Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower issues-scald guard or pressure problems?
[ 5 Answers ]
We moved into our 90 year old home in April. In 2001 a nice addition was put on that included a master bath with tile surround and 2 showers in the surround. I noticed at first that when I pushed the handle all the way to the hottest setting (on both showers), the water cut off all the sudden to...
Can this shower be upgraded to anti-scald?
[ 6 Answers ]
O great and wise experts of ye plumbing page, behold thy photograph of me current shower knobs (photo attached). They are spaced 8" apart (on center). Is there any hope of integrating an anti-scald valve into this configuration without considerable damage to the tiles? Or perhaps a method for...
Tub/shower Faucet with anti scald feature
[ 1 Answers ]
I am installing Glacier Bay Tub/Shower Faucet (three handle with anti scald feature) (Model 439-314G. I cannot adjust water temprature. The balance spool is clean as the system is brand new. Is there any special method to adjust limiting device? I am using the booklet "installation procedure". ...
No pressure Moen anti scald shower valve
[ 9 Answers ]
I have a new house (lived in three years) and have a shower plus a combo tub/shower valvein another bath. These are Moen valves (probably antiscald).I see both have small in line stop ball valves. The problem, there isn't a lick of pressure comes out either valve for taking a shower. I've tried...
Scald Guard
[ 1 Answers ]
I am completely remodeling a bathroom (new shower addition and new drain pipes) and opted for a two-handle shower setup. The inspector said that I need a scald guard on the valve, but this does not make sense. Since the temperature of the water is controlled by the position of each handle it... View more questions Search
|