Ask Experts Questions for FREE Help !
Ask
    digger1978's Avatar
    digger1978 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 4, 2005, 09:51 AM
    Washing Machine Water Box Fittings
    My cold water water box fitting for the washing machine is leaking. It is sweated onto a 1/2" copper pipe. I do not know how to get all the water out of the pipe to unsweat the joint. There is hardly any room to work because of the tight area and how the fitting is attached to the water box and copper pipe. The leak is coming from the top of the fitting, not where it is sweated. I can't see where the leak is coming from but it is running down the threads on the fitting so I know it is coming from up top. Is there a way to repair the fitting with maybe some kind of gasket?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 4, 2005, 11:19 AM
    Quote Originally Posted by digger1978
    My cold water water box fitting for the washing machine is leaking. It is sweated onto a 1/2" copper pipe. I do not know how to get all the water out of the pipe to unsweat the joint. There is hardly any room to work because of the tight area and how the fitting is attached to the water box and copper pipe. The leak is coming from the top of the fitting, not where it is sweated. I can't see where the leak is coming from but it is running down the threads on the fitting so I know it is coming from up top. Is there a way to repair the fitting with maybe some kind of gasket?

    Yes, Wrap the male threads with Teflon tape and reinstall. If it's not leaking from the sweat joint then you don't need to resolder it. Have a great Forth.
    Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing Machine Box [ 10 Answers ]

Greetings. My basement has an overhead Sewer pipe going out to the front. Therefore, if I want a washing machine in the Basement, I have to pump the discharge up and out in some way. Right now, the discharge goes to the sump pump hole and then is pupmed out. I want to install a washing...

Washing machine water troubles [ 4 Answers ]

Hi just a question to see if anyone could help as to my problem with my washer. The last few days when running washer (cold water only) the water seems to take a very long time to fill. When the switch if flipped to warm/cold or any other combo. The water comes out fine. Just on cold cold does...

No hot water in the washing machine [ 1 Answers ]

:confused: The hot and cold lines leading into the washer are OK, but for some reason the washer only runs cold. Not warm or hot? What could be the problem?

Cold water not coming out in washing machine [ 5 Answers ]

The cold water dribbles into the washing machine when loading; I checked hose connecting machine to faucet in back. The screens were dirty; every time I do load the screens get dirty again. Is stuff coming out of the faucet? It seems to me. What does that mean? The hot water faucet is fine. My...

No water from washing machine tap [ 7 Answers ]

Hi, Need some help. Ive just bought a washing machine. As the man was about to the connect the hose to tap/faucet, no water comes out. However the rest of the house, the water flows fine from the taps. What could the problem be.. . Thanks in advance


View more questions Search