Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
220 to 110
[ 7 Answers ]
I'm wanting to run a 110 outlet off my 220 serface unit how do I go about doing this?:confused:
110 to 220
[ 5 Answers ]
We need an outlet that needs to support 220v 27.4 amps. Ihave 2 120 lines at that location both with 20 amp breakers. Could I just use those lines connet them to the new outlet 2 hots and 1 ground. Then get a double poled breaker in place of the other 2 breakers. If so on the new dbl breaker...
Is it 110 or 220?
[ 2 Answers ]
Hi, I had 2 outlets installed where there were once a heater and its thermostat. The light on my voltage tester is on for both, but when I plug a clock radio (110) into either new outlet, nothing happens. Is it possible that these new outlets are wired at 220 to accommodate the heater that was...
Wwiring from a 220 to a 110 plug (and an extra wire)
[ 6 Answers ]
I just bought a dryer, thinking that I had a dryer outlet, only to realize that I don't. I bought a 3 prong plug, for a normal wall socket (and I know that if it works at all, it will not be that efficent) and when I went to strip the wires on the plug, I found out that there where 4 wires in the...
Getting 110 from 220
[ 3 Answers ]
I have a 3-wire 220V going to my well house. I am wanting to come off the 220 to a 110 outlet. I realize this is not the safest thing to do but it is only temporary. My question is, I know I use one wire so I cut let's say the white wire and connect it to one side of this GFI outlet, Do I connect... View more questions Search
|