Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connect Honeywell HE360 directly to Amer Std Freedom 90?
[ 0 Answers ]
Thanks. I wasn't clear enough on my Q. I want to know how (if) I can connect the humidifier directly to the furnace PC board w/o installing the humidistat (I don't need to adjust the humidity) and sail switch. The furnace PC board does not have any obvious terminal markings such as "HUM" for...
Installed Honeywell rth7400 thermostat, fan runs all the time in emergency heat
[ 6 Answers ]
I have installed a Honeywell rth7400 thermostat on my York Heat Pump. The normal heating and cooling cycles work fine, but in the "emer heat" mode, the circulating fan in the inside unit runs all the time. I have verified that the resistor elements cycle as they should and the house temp is held...
Honeywell HE360 Humidifier Is Not Working
[ 3 Answers ]
I recently installed two Honeywell HE360 humidifiers. One above each furnace in a dual zone system. Everything seems to be working like it should, but the humidity in the house isn't going up. The units are installed on the discharge of each furnace, and are piped to cold water. The water...
Furnace 3 amp fuse blows after install of honeywell HE360 humidifier
[ 4 Answers ]
My wife's uncle installed a new honeywell HE360 humidifier and now the 3 amp fuse keeps blowing? I had a humidifier before and just installed a new onewhat could be the problem? Please help Thank you Larry View more questions Search
|