Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper wiring for 240V elec wall heater with two 120V supply lines
[ 2 Answers ]
I have an older 240V 1000W electric wall heater (no fan, built-in thermostat) which has 2 gray wires for attaching incoming supply. One gray line goes through the thermostat then on to one end of the heating coil itself. The other gray line goes directly to the other end of the heating coil. ...
Clawfoot tub solution for wall supply lines instead of floor
[ 4 Answers ]
We are finishing our basement and in the bathroom we are putting in a clawfoot tub. My husband put the supply valves in the wall because he was afraid of freezing in the floor. But because of this we cannot find any supply lines that come from the wall they all come from the floor. Is there...
Running Supply lines to the new bathroom in my unfinished basement
[ 3 Answers ]
Hello, I am installing a full bath (w/shower stall) in my unfinished basement. I need to run supply lines for the toilet, shower, and sink from the laundry room which is adjacent. The current lines are C-pvc. I guess my question is: 1) What is the best way to run the lines? And what size should...
Basement bathroom install, testing supply lines
[ 4 Answers ]
Need some help. I'm a novice at plumbing but pretty handy. I am installing a bathroom in my basement. I will be tee-ing off the main 3/4" copper supply lines with 3/4" CPVC via sharkbite connectors. The 3/4" lines will feed cold and hot water to the bathroom. Here they will be split to...
Can I run Supply lines in outside wall
[ 2 Answers ]
I live in NJ and am remodeling a bath. Can I run my supply lines to the shower in an outside wall? If so any recommendations or hints concerning this? View more questions Search
|