Ask Experts Questions for FREE Help !
Ask
    bossyu's Avatar
    bossyu Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 16, 2007, 10:03 AM
    Breaking concrete wall and reinforcing
    Hello ,

    I am current having difficulty researching how to connect two bachelor apartments into a two-bedroom unit.The wall between them is a concrete wall and I do not know if this is a supporting wall. My questions:
    1. How do I know if the wall is a supporting wall?
    2. Is it feasible to tear down a supporting wall and reinforce another part of the building?
    3. Is it feasible to partially tear down the wall (ie. Make a door in it) and not reinforce anything?
    4. Where could I research these topics?

    Thanks very much
    Nosnosna's Avatar
    Nosnosna Posts: 434, Reputation: 103
    Full Member
     
    #2

    Feb 16, 2007, 10:16 AM
    1) It almost certainly is a supporting wall. There is no reason not to use a long wall of that type in a load-bearing capacity, as it needs to be there anyway, and if it is not load-bearing, that means that the load must be born by other structures elsewhere, limiting the size of the spaces.
    2) No. A load-bearing wall bears a load at its location. To reinforce elsewhere does nothing to affect what this wall needs to hold.
    3) Possibly. That depends on the construction of the wall, the load it bears, and the strength of the materials.
    4) You would need to speak to a professional about this... someone who knows the building codes and the materials used in the structure. You won't be able to do this as a do-it-yourself project.
    bossyu's Avatar
    bossyu Posts: 2, Reputation: 1
    New Member
     
    #3

    Feb 16, 2007, 10:30 AM
    Quote Originally Posted by bossyu
    Hello ,

    I am current having difficulty researching how to connect two bachelor appartments into a two-bedroom unit.The wall between them is a concrete wall and I do not know if this is a supporting wall. My questions:
    1. How do I know if the wall is a supporting wall?
    2. Is it feasible to tear down a supporting wall and reinforce another part of the building?
    3. Is it feasible to partially tear down the wall (ie. make a door in it) and not reinforce anything?
    4. Where could I research these topics?

    Thanks very much
    Another question:
    Is it feasible to break the wall and put a supporting beam at the same location?
    Nosnosna's Avatar
    Nosnosna Posts: 434, Reputation: 103
    Full Member
     
    #4

    Feb 16, 2007, 10:42 AM
    Possible, but tricky, and usually not advisable.

    The load on the wall has to be supported at all times. This would mean putting temporary jacks in place. This is not a trivial problem: Not all points on the ceiling and floor are suitable for support in this way, and the load may not be supportable except directly in line with the wall. Once the jacks are in place and the existing wall is removed, the new support structure must be put into place, and must be done so in such a way that the load is fully supported, and not allowed to settle onto the support as this could damage the structure.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing/breaking concrete? [ 6 Answers ]

I had heard there was a liquid you could buy to assist in indoor concrete removal. I was told you could drill holes in a line and pour this stuff in the holes and it would then expand and break the concrete in a line. I have searched the web high and low for this stuff, however I have not found it....

Concrete Wall [ 3 Answers ]

I am going to pour a slab in a pole barn. I want to have 4' high by 12' long concrete wall on both sides of the wash bay. Can I form the walls up so that I can pour the walls and the slab at the same time?

Breaking up concrete for tub drain [ 1 Answers ]

The basement tub enclosure rough in is in the wrong location and I need to move the stub out diagonally about 5 feet. The concrete is about 6" thick. What do you recommend as the preferred approach to break up the concrete. Saw or Jackhammer? I have never used either tool. Thanks in advance for...

Concrete garage floor breaking up [ 1 Answers ]

My concrete garage floor is at least 40 years old. The garage is unheated, cinderblock construction. The concrete floor is worn down and breakup up on the outside 2 foot perimeter of the floor. The entire floor is 13'9" x 22'10". What would be the best method to repair this floor to make it one...


View more questions Search