Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to tie into cast iron stack
[ 1 Answers ]
I want to to tie into a 4" vertical stack it has a clean out with 4" brass plug. My question is this; Is there some way to install an adapter to this cleanout using an adapter of some sort for PVC?
How do I tie into an existing cast iron waste stack?
[ 4 Answers ]
I'm considering adding a 2nd bath to a house that was built in 1951. The cast iron waste stack is in an easily accessible location, but the only vertical space available is below 3 other elbow & just above the lowest why used for clean out. What's the approach for tying into this location? Do I...
Cast iron vent stack and PVC waste lines
[ 1 Answers ]
I decided to replace the cast iron portions of my waste lines from a double vanity sink to the waste line. Previously a plumber had replaced the accessible portions with PVC so I have quite a mix. Now that I have opened up the wall, I see that I have a cast iron vent stack / hub (see pics: ) that...
Connecting basement plumbing to cast iron waste stack
[ 1 Answers ]
I'm putting in a half bath and a washing machine in our basement and I'd like to like to connect it to the main stack and drain, which is all 4-inch cast iron. The sweep where the stack meets the sewer line has no clean out and appears to have some corrosion, so I'd like to replace it. I was...
Exterior Cast Iron Waste Stack
[ 2 Answers ]
I have an old house where the soil stack (4" cast iron hub) was installed on the exterior wall out side of the house. At the second floor level there is a sanitary "Y" into the house second story bath. Above this "Y" the cast iron reduces to 2" cast iron vent but does not extend to the roof and... View more questions Search
|