Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is there any Float Switch in which the float slides up and down on the rod?
[ 3 Answers ]
Is there any Float Switch in which the float slides up and down on the rod?
Engineering term for a particular type of resistance to force
[ 0 Answers ]
Hello Is there an engineering term that references a body of material’s resistance to penetration? Interested in the body being fluid (water) as well as semi sold (i.e. granular cereal foods). One case in point: I am attempting to configure a weight that will penetrate water but will...
Screeching Fluidmaster type 400 Float valve
[ 8 Answers ]
Hi About 8 months ago I fitted Fluidmaster type 400 Float valve to my toilet cistern. It has recently started to make a (loud) screeching noise at the start of the flush. Any thoughts on cause and cure. Cheers David:)
Convert double sink to single
[ 3 Answers ]
It is very hard to wash pots and pans so I want to convert my 33" double sink into a deeper single sink (9 inches). I have a limited budget so I wanted to know if my plumber is going to charge me a lot of money for this? Currently I have a disposal on 1 side and a drain on the other. Is this...
Convert plumbing from single vanity to double
[ 25 Answers ]
We had a single sink vanity in place. Now we're remodeling and will be getting a 60" double sink vanity. Unfortunately I cannot use the stubs/drain that are existing, because the vanity has cabinet/drawer vertical supports that are right where the current supplies stub out. Can someone tell me... View more questions Search
|