Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Where can I find a clean out plug cap for old cast iron pipes
[ 6 Answers ]
The cap of my u shaped clean out access is stripped. It does not seal tightly causing constant dripping from the area. How can I fix the problem if a cap can't be located. Thank you
Clean out plug necessary?
[ 0 Answers ]
My daughter lives in a house built before 1940. A plumber told them that their floor drain in the basement doesn't need a plug in the clean out. In fact, they were told that there was a 'built in' p-trap AND the reason floor drain was backing up from the washing machine was because of the...
I'm wiring a 208 plug from my 208 panel... 2 hots,nuetral, and ground to plug, right?
[ 7 Answers ]
... same question as above...
I changed the spark plug,oil,filter is clean and it had gas in it.it won't start
[ 6 Answers ]
It's a briggs stratton small lawn mower. It was given to me and I put a new spark plug in it and cleaned the filter and it cranked right up. I used it 3 times and it died again so I got a nother spark plug because old one was rusted and changed oil and filter is clean and has gas in it... it starts...
Major plug no clean out valve what to do ?
[ 2 Answers ]
We have a plug somewhere in the line. We can not find the clean-out for the plumber to access the line. He says find the pipe or he won't even attempt to fix it. Is there a way to fix the problem from inside the house? View more questions Search
|