Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to compute size of main feeder line & main breaker?
[ 1 Answers ]
Panel board 1(single phase) - total wattage=17,000w @ 230V - has 2.5Hp ACU (largest motor) Please. Solve for.: 1. size of main feeder line 2. main breaker Panel board 2(3phase) - total wattage=10000w @ 230V
For 100 A main breaker and 7-40 A branch circuit breakers, what is size of main lugs?
[ 0 Answers ]
None
1 breaker causing another breaker to trip when I reset! What is This about?
[ 5 Answers ]
I reset a breaker and it immediately trips its self and another breaker... this never happened before... if I reset 1 its OK but when I reset the other breaker they both trip... and these are 2 separate circuits... the 2 breakers are not even next to each other in the panel
Circuit breaker trip after install of GFCI breaker
[ 3 Answers ]
I'm replacing an outlet under kitchen sink that garbage disposer and dish washer were plugged into because they stopped working. The old outlet was not GFCI. So I'm attempting to replace it with one. Our home was built in the '50s and has no ground line yet. I used an extension cord to plug them...
Can I convert a main breaker Cutler Hammer loadcenter to main lug?
[ 1 Answers ]
I was wondering if Cutler Hammer made a part to convert a main breaker load center (CH) style, to a main lug panel. If so, does anyone know the part number or can you refer me to a location where I could find it? Cutler Hammer's website is not too user friendly. Thanks View more questions Search
|