Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating element Kenmore 70 series electric dryer
[ 6 Answers ]
When I start the dryer the heating element gets hot for about 5 seconds then blows a fuse. The dryer will still cycle, but never get hot again. I replaced the fuses and no luck. When I took the plate off I can see that it is getting hot. There are 5 coils and it appears that the top 3 coils are...
Electric oven heating element doesn't heat up
[ 0 Answers ]
The background: recently purchased house with a duel-fuel (gas range, electric oven) stove. Did some renovation work including brand new main (100amp) and secondary (60amp) electrical panels. Electric oven has not worked since we moved in (ie after reno work). Previous owners swear that it worked...
Nordyne Electric Furnace Heating Element
[ 2 Answers ]
Hello, I have A Nordyne Electric Furnace- model# E2EH-012HA, and the heating element stays hot Even with thermostat in the off position, and, of course, the blower runs also with the element remaining hot. I have to turn the breaker off to stop the element from heating. Any help would be...
Heating element for a older Kemore electric dryer
[ 1 Answers ]
Hi All, Our Kemore Dryer stopped working today, the drum is spinning but it is not heating up. I believe it is the heating element. Can some point me in the direction of where it might be located at. Thanks, Scott
Electric Furnace - heating element
[ 3 Answers ]
I am trying to convert from my broken boiler furnace to an electric furnace. I have central air and all the vents from that. Can I just buy a heating element and put it into the air handler? If I can, how do I know what size heating element to buy? The search on the internet gave 10 and 15 KW... View more questions Search
|