Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to know the amount of load a 20amp breaker can take when connecting to 208v?
[ 7 Answers ]
I in the process of installing lights. These Light uses 208v at 1.35 amps each with a 250w load, how many lights can I install onto a 20amp beakers that is connected to 208v?
I have read that a circuit can drive a 7 ampere load.how mny watts?=7A load.
[ 4 Answers ]
What appliances in our home work on 7A.) how to relate the ampere to watt conversion(eg:a bulb of 15 w need how many amp of current?
Kenmore elite front load takes a long time to go through the 2nd load
[ 0 Answers ]
My kenmore elite front load goes through the various cycles with the 1st load fine but it takes a very long time (hours) to go through the 2nd load with the same settings as the 1st.
Kenmore front load washer won't agitate/spin if load too heavy
[ 2 Answers ]
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
277/480 load after transformer = to 120/208 load feed
[ 1 Answers ]
I have a 800 amp 120/208 3P stand up section that feeds a step up 90kva transformer and the loads are nearly equal? I thought that after the transformer the load of 277/480 would be drawing less. We have about 500 amps per phase being drawn in front of the transformer and the load at the sub... View more questions Search
|