Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you fix low pressure at the shower head when good pressure present at faucet?
[ 1 Answers ]
Good hot and cold water pressure at faucet but when switched to shower, temperature of water drops drastically (minimal hot water coming through) and water pressure is very low. Shower head has been switched, mesh has been cleaned of any debris, and black rubber ring has been changed. What can I...
Low water pressure-copper pipe-city pressure has been checked-pressure low at any fix
[ 20 Answers ]
Low water pressure copper pipe low at all fixtures and faucets. City has checked pressure. They installed new shutoff in streetalso. They checked meter and was OK. I am orignal owner feed from street is 3/4".copper house also. House built in 1972. Problem started 6 months ago. I am at whits...
Does shallow well jet pump build air pressure in the bladder or just water pressure?
[ 0 Answers ]
My 40/60 3/4hp shallow well jet pump will run continuously and will not build up air pressure in the bladder. The bladder will hold pressure though. I have filled it with air and when I turn on the water it loses its pressure and when the pump kicks on it just keeps running without building the...
What is the correct suction pressure and head pressure for a 3 ton tempstar heat pump
[ 1 Answers ]
When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is freezing the compressor, accumulator tank and all the lines soild ice.
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading View more questions Search
|