Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter ceiling fan / light w/remote wiring
[ 4 Answers ]
I have a Hunter ceiling 3 speed fan with light that uses a remote control. The fixture was removed for ceiling painting and now I can not get it wired correctly. From the fixture there are 4 colored wires that match the 4 colored wires for the relay box inside the canopy. Also from the fixture is a...
Hunter Ceiling Fan/Light w/remote installation
[ 11 Answers ]
Hello, I am have a hunter ceiling fan and I am having trouble installing this correctly. From the ceiling of the wall I have 4 wires (Red/ Black/ White/ and bare Copper). From the fan there is are only 3 (Black/ White / Green). Please assist me with installing this fan. I have tripped the...
Hunter remote not working
[ 2 Answers ]
Hunter ceiling fan.its a round receiver under lite kit . Model cp-911or ser.218109. Alls will do is make motor humming noise no movement or lites. New battery. Checked continuity all pins are hot when wall switch is on.
Hunter Remote with Hampton Bay fan & light
[ 4 Answers ]
I have a Hampton Bay, Courtney Model 42-CN ceiling fan with light kit. It works fine. I am adding a remote control kit, Hunter Universal Model 27185. The directions for the remote call for a red wire leading to the light, but the wires from the ceiling are black, blue and white. Assuming blue...
Hunter Ergonimic Ceiling Fan w/ Remote - Wiring to single switch
[ 2 Answers ]
We just installed a Hunter Ergonomic Ceiling Fan with a remote. It is powered by a single light switch and our intention was to always have the light switch "on" and use the remote control to turn it off or on. When we turn the light switch on, the light comes on and all fan functions can be... View more questions Search
|