Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to tap 120V out of 240V heater circuit
[ 9 Answers ]
Hello, I need to tap 120V out of the existing 240V baseboard heater wirings to use a 120V 3-prong washer (the heater itself was removed, only the wiring left. I do have a 120V outlet nearby but on the other side of the doorway so I don't want to use it) Currently there are 5 wires at the 240V...
Can I have a 120V and a 240V outlet on the same circuit?
[ 13 Answers ]
I am installing a 4 wire 50 amp plug in the laundry room but I am also plumbing a gas line. If I end up with a gas dryer I'll need a 120V plug. Is it permissible by national code to install a 20A 120V plug off the 50 240V breaker. Since it's an A or B use case it seems safe but is it code...
Installing new 240V circuit for wall heater
[ 1 Answers ]
I had an electrician install all new circuits, outlets and recessed lighting for my basement finishing project. Just as I'm about to put up the drywall I considered that it might be worthwhile to add a wall heater before I close everything up. This morning I purchased a 3,000 watt model at HD. ...
240v Electrical circuit testing
[ 1 Answers ]
I have replaced a celling light in my kitchen. The replacement light has a stainless steel casing, however the wiring circuit in the house has no earth at the celing, so I have not connected an earth. It has 2x black wires , 2x red wires ( switching & connected together ) & 1x black wire with a red...
240V Halogen GU10 Mains on a 120V Circuit ?
[ 5 Answers ]
I recently came across some GE 240V halogen bulbs in England, they are a GU10 type base and MR16 size/shape/type(?) bulb. They are not available in North America yet and having been available for some time in the UK and Europe, it doesn't look promising they will be on the market here anytime... View more questions Search
|