Ask Experts Questions for FREE Help !
Ask
    buckingdan's Avatar
    buckingdan Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2009, 05:40 AM
    How to set gap on beckett oil burner electrode
    I have a Beckett Burner; looks like a AFG model. 2 weeks ago I changed the filter, screen and nozzle. She ran well for 2 days; and now she shuts off intermittently. I noticed that when I reset her, she hesitates before she ignites; she never did that before. I am assuming that the electrode gap is off, due to the ignition hesitation; am I right or wrong? Several weeks ago I vaccumed the burner. I now also notice that when she does ignite I see and smell a little smoke. Could it also be that the eye is shutting off the burner because the smoke prevents her from seeing? There is so much to an oil burner and I love it. Also is there a website I can go to for troubleshooting a Beckett Oil Burner?
    Thanks for your time.

    Dan
    :confused:
    @ [email protected]
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Apr 26, 2009, 06:24 AM

    1/8 inch apart 1/4 in out and 1/2 in up
    woodworker26's Avatar
    woodworker26 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Dec 19, 2010, 03:27 PM
    I've heard that the Beckett oil burner electrode gap setting is 1/8 inch apart 1/4 in out and 1/2 in up. The 1/8"apart is simple enough to understand.

    The 1/4" out is a measurement from the probe ends to the side of the nozzle housing or 1/4" from the probes to the tip of the nozzle?

    The 1/2" up is a measurement from the face of the nozzle to the tips of the electrodes?

    I just had it serviced and its been popping the safety on the honeywell flame-out sensor controller.

    Jim
    Archie3's Avatar
    Archie3 Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 12, 2012, 10:15 AM
    This the site for the Beckett (service) manual. It has measurements for the igniter gap along with a nice diagram. Lot of other info, too.

    http://www.beckettcorp.com/protect/techsuppt/product-manuals/6104%20BAFG%20R02%203706.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beckett AFG Oil Burner [ 9 Answers ]

Before I call a repair man would anyone here have an answer to why my oil burner will not kick on? Because of the cost of oil and the summer months offering some relief from the expense I decided to switch off the emergency switch so my expense on heating the hot water would be limited. For 2 days...

How to Bleed a 25 yr old Beckett Oil Burner [ 2 Answers ]

Hi, I ran out of home heating oil. I added back 10 galllons to get me through the night till a morning delivery. How do I bleed the air out of the line so the Beckett Burner will fire? Thanks you.

Priming a beckett oil burner [ 1 Answers ]

How do you Prime a beckett oil burner?

Beckett oil burner-forced hot air [ 1 Answers ]

My furnace doesn't start up when the temperature drops. It restarts when Iuse the reset button. What do you think the problem is?

Beckett Oil Burner AFG [ 8 Answers ]

The Beckett AFG caused some trouble this year when my grandchildren accidentally turned off the EMERGENCY OIL Burner switch at the top of the stair case.. For some reason it caused water to spray out flooding the floor. I'd like to know how this could be prevented? I was told by the repair man the...

View more questions Search