Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan will not work after replacing 3 speed pull chain switch
[ 129 Answers ]
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
Ceiling Fan wiring on a 3-way switch HELP!
[ 17 Answers ]
I originally had two 48" fluorescent lamps in the kitchen. The ballasts have gone and I've taken this opportunity to put up a ceiling fan. I have two switches. One at each entry to the kitchen. The question is... When the original lighting was removed there were two different sets of wires,...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
Need help replacing a 5-8 wire ceiling fan switch.
[ 1 Answers ]
I am trying to replace a 3 speed, 5-8 wire fan switch with a Harbor Breeze switch. The old switch has numbers 1-Blue wire, 2-Red wire, 3-Orange wire, 4-? and C-Black wire. I don't know which wire was in 4 as it fell out. The old switch is single layered with connection holes and the black wire...
Ceiling Fan Wiring To Switch
[ 1 Answers ]
I just installed a new ceiling fan in a room where the switch previously controlled only an outlet and there was no power directly at the switch, only at the outlet. At the switch box I wired the two white wires together and then wired the black wires, one each, to the screws on the switch. The... View more questions Search
|