Ask Experts Questions for FREE Help !
Ask
    slc258's Avatar
    slc258 Posts: 68, Reputation: 3
    Junior Member
    		  
    #1

    Sep 22, 2008, 06:42 AM
    How much prime rib do I need
    Im having a party and plan on having about 15 people, how do I calculate how much meat (lbs) should I get... or at least is there a way to calculate per person what I need to order?

    Thanks
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Sep 22, 2008, 06:45 AM
    Well if I'm invited you'll need about 20Lbs.

    Honestly there isn't really a hard and fast rule, but it really depends on how you intend to serve it.
    Are you thinking a full sit down affair or buffet.
    How generous do you want to be, etc...
    jambourrie's Avatar
    jambourrie Posts: 73, Reputation: 10
    Junior Member
    		  
    #3

    Oct 7, 2008, 07:33 PM

    When I made a bone-in prime rib roast, I always take the number of people and put one and a half people per bone. That always yields plenty - because there's people who eat tons, and people who eat a little bit. (I also make delicious sides too... so I could even get away with making a bone or two less, but I like some leftovers).
    melloboi23's Avatar
    melloboi23 Posts: 48, Reputation: 2
    Junior Member
    		  
    #4

    Nov 10, 2008, 07:14 PM

    Half a pound per person. Rule of thumb for catering expensive meats and then add an 8% waste
    paterno's Avatar
    paterno Posts: 14, Reputation: 2
    New Member
    		  
    #5

    Jan 7, 2009, 03:30 PM

    Two people per bone
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #6

    Jan 7, 2009, 04:56 PM

    Depends if you use bone-in or just the rib with no bone

    Standing rib roast with no bone, figure 10 oz per person
    At 10oz pp

    You would be safe with a 10lb rib no bone, but of course can always go up from there

    Usually you will see 8, 10 and 12 oz portions in restaurants
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

How do I prime a well pump [ 10 Answers ]

We have been without power for over 10 hrs and now I have no water. I was told I need to prime the well pump but I don't know how. I have never had this problem before. Can Anyone one help. The holding tank is inside the pump its self is out side.

Pump prime [ 2 Answers ]

I lost my prime on the pump for my home well. My question is how to prime?

Prime gas furnace [ 1 Answers ]

How do I prime my gas furnace, it ran out of oil

Prime factors [ 1 Answers ]

How do I write 243 ina factor tree and then give the answer in index form :)

Prime numbers [ 7 Answers ]

a buddy of mine posts hard math problems on myspace. I'm no math whiz so I enlist the help of others... help me out please What is the largest prime you can write using the digits from the 7th 4-digit prime in consecutive digits of (-1)^(1/(Pi * I))... where "i" of course equals sqrt(-1) ...

View more questions Search